Specifications:
- Supply Power 120, 240 Volts
- Wattage 3, 5, 9 - Watts per foot
- Module Length 24 inches (*1)
- Maximum Circuit Length 660 Feet (*1)
- Continuous Operating Temperature 220º F / 105º C
- Maximum Exposure Temperature 260º F / 127º C (De-energized)
- Dielectric Strength Spark Test 4000 VAC
- UL & CSA Approved
Construction:
Buss
Wire - 2/C #16 AWG (19/29) bare stranded copper
Buss
Insulation - TPE extruded jacket
Binder
- Nominal 30 mil. of (TPE -Borealis NO. 5595) extruded in
a figure-8 design
Heating
Element - Nickel-Chromium resistive wire #38, #39 or #40 AWG
Jacket
- Nominal 30 / 40 mil. of (TPE -Borealis NO. 5595) extruded overall
Also Available:
Overbraids
of tinned or nickel plated copper and stainless steel
Overjacket
of PVC, - *Teflon FEP, PFA or Tefzel*
Monitor
wire
Custom
constructions
Features:
Low Cost - This
cable is manufactured utilizing PVC or TPE insulation when applicable.
Constant Wattage - Uniform
heat, wattage remains the same, regardless of circuit length.
Zone Modules - Hand soldered and inspected to maintain 100% contact with buss wires.
Cut to Length on Site - Parallel resistance type heater eliminates the need for inventories
of different size heaters.
Application:
This
cable is designed for low temperature applications including freezers
and animal pen enclosures.
Caution:
Type M-T-TPE
cable can be overlapped provided that the process temperature
is less than
140°F.
*1- Depending on the Voltage and Wattage Specified
|
