Specifications:                       

·        Supply Power                                             120 Volts

·        Wattage                                                         3 - Watts per foot

·        Module Length                                            24 inches

·        Maximum Circuit Length                          330 Feet

·        Continuous Operating Temperature    175º F / 80º C

·        Maximum Exposure Temperature         220º F / 105º C (De-energized)

·        Dielectric Strength                                    Spark Test 4000 VAC

·        UL Approved

Construction:     

Buss Wire - 2/C  #16  AWG tin coated stranded copper

Buss Insulation - PVC extruded jacket

Binder - Nominal 10 mil. of  PVC extruded in a figure-8 design

Heating Element - Nickel-Chromium resistive wire

Jacket - Nominal 20 mil. of  PVC extruded overall

Also Available:

Overbraids of tinned or nickel plated copper and stainless steel

Overjacket of PVC, TPE, Teflon* FEP, PFA or Tefzel*

Monitor wire

Custom constructions

Features:     

Low Cost

Constant Wattage - Uniform heat, wattage remains the same, regardless of circuit length.

Zone Modules - Hand soldered and inspected to maintain 100% contact with buss wires.

Cut to Length on Site - Parallel resistance type heater eliminates the need for

inventories of different size heaters.

Caution:  

Type M-T-PVC cable can be overlapped provided that the process temperature is less than 140°F.