Specifications: 

·        Supply Power                                               120, 240, 480 - Volts

·        Wattage                                                           3, 5, 9, 17 - Watts per Foot

·        Module Length                                              24 - Inches  (*1)

·        Maximum Circuit Length                            720 feet  (*1)

·        Continuous Operating Temperature       450º F / 232º C

·        Maximum Exposure Temperature           500º F / 260º C (De-energized)

·        Dielectric Strength                                       Spark Test 4000 VAC

·        UL Approved

Construction:

Buss Wire - 2/C  #12 AWG tin coated stranded copper

2/C  #12 AWG nickel plated stranded copper (optional)

Buss Insulation - PFA Teflon extruded jacket

Binder - PFA Teflon extruded in a figure-8 design

Heating Element - Nickel-Chromium resistive wire

Jacket - PFA Teflon extruded overall

Also Available:

Overbraids of tinned or nickel plated copper and stainless steel

Overjackets of PVC, TPE, Teflon* FEP, PFA or Tefzel*

Monitor wire

Custom constructions

Features:

PFA Teflon - Entire construction employs Dupont PFA Teflon which is unaffected by chemicals and solvents that may cause rapid deterioration of other plastics and all but the most expensive metal alloys. High resistance to moisture, flame, and radiation is also realized.

Optional Nickel Plated Bus Wires - For maximum thermal and corrosion protection.

Constant Wattage - Uniform heat; wattage remains the same regardless of circuit length.

Zone Modules - Hand soldered and inspected to maintain 100% contact with bus wires.

Cut to Length on Site - Parallel resistance type heater eliminates the need for inventoriesof different size heaters.

Caution:  

Type M-T-PFA cable can be overlapped provided that the process temperature

is less than 310°F.

*1- Depending on the Voltage and Wattage Specified