Specifications:     

·        Supply Power                                               120, 240, 480 - Volts

·        Wattage                                                           3, 5, 9, 17 - Watts per Foot

·        Module Length                                              24 - Inches  ( *1)

·        Maximum Circuit Length                            720  feet   ( *1)

·        Continuous Operating Temperature      400º F / 204º C

·        Maximum Exposure Temperature           450º F / 232º C (De-energized)

·        Dielectric Strength                                      Spark Test 4000 VAC

·        UL Approved

Construction:

Bus Wire - 2/C  #12  AWG tin coated stranded copper

2/C  #12  AWG nickel plated stranded copper (optional)

Bus Insulation - FEP Teflon extruded jacket

Binder - FEP Teflon extruded in a figure-8 design

Heating Element - Nickel-Chromium resistive wire

Jacket - FEP Teflon extruded overall

Also Available:

Overbraids of tinned or nickel plated copper and stainless steel

Overjackets of PVC, TPE, Teflon* FEP, PFA or Tefzel*

Monitor wire

Custom constructions

Features:

FEP Teflon - Entire construction employs Dupont FEP Teflon which is unaffected by chemicals and solvents that may cause rapid deterioration of other plastics and all but the most expensive metal alloys. High resistance to moisture, flame, and radiation is also realized.

Optional Nickel Plated Bus Wires - For maximum thermal and corrosion protection. 

Constant Wattage - Uniform heat; wattage remains the same regardless of circuit length.

Zone Modules - Hand soldered and inspected to maintain 100% contact with bus wires.

Cut to Length on Site - Parallel resistance type heater eliminates the need for inventories  of different size heaters.

Caution:  

Type M-T-FEP cable can be overlapped provided that the process temperature

is less than 250°F.

 
*1 - Depending on the Voltage and Wattage Specified